Choosing Between Block Paving, Tarmac, and Resin for Your Driveway
Understanding Your Driveway Options
Choosing a new driveway surface is a significant decision. The material you select affects not only the look of your home but also its durability, maintenance needs, and how it handles daily use. Three of the most common options are block paving, tarmac, and resin-bound surfaces. Each has its own strengths and weaknesses, and the right choice depends on your priorities, budget, and the specific conditions of your property.
This article compares these three materials in a practical way. It covers how each one performs, what to watch out for, and the situations where a particular option tends to work best. By the end, you should have a clearer idea of which direction suits you.
Block Paving: Classic Look with Flexible Design
Block paving consists of individual concrete or clay blocks laid closely together over a prepared sub base. The blocks sit on a bed of sharp sand, and the joints between them are filled with a fine kiln-dried sand. This construction gives the surface a distinctive, patterned appearance that many homeowners find appealing.
Strengths of Block Paving
One of the main advantages of block paving is its visual versatility. You can choose from a wide range of colours, shapes, and laying patterns. Common patterns include herringbone, stretcher bond, and basketweave. This allows you to create a driveway that complements the style of your house and adds kerb appeal.
Another practical benefit is repairability. If a block becomes stained, cracked, or damaged, you can lift that individual block and replace it. The rest of the driveway remains undisturbed. This is much easier than repairing a continuous surface like tarmac or resin.
Block paving also performs well in terms of drainage. The joints between blocks allow rainwater to soak through into the sub base, provided the sub base is designed to be permeable. Many modern block paving driveways are built as permeable paving, which helps manage surface water and meets drainage regulations.
However, there are some downsides. Block paving can be more expensive than tarmac, especially for complex patterns. Over time, the sand in the joints may wash out or be displaced by weeds and ants. Regular sweeping and occasional re-sanding are needed to keep the surface stable. Weed growth in the joints is also a common complaint, though careful installation and proper edging can reduce it.
Tarmac: Cost-Effective and Hard-Wearing
Tarmac, also known as asphalt, is a mixture of aggregates, sand, and bitumen. It is laid hot and compacted to form a smooth, continuous surface. Tarmac driveway installation is a popular choice because it offers good durability at a relatively low cost.
Strengths of Tarmac
The main draw of tarmac is its value for money. For a given area, tarmac tends to be cheaper than block paving or resin-bound surfaces. It also sets quickly, so the driveway can be used within a day or two of laying, depending on the weather.
Tarmac is very hard-wearing. It can withstand the weight of vehicles, the freeze-thaw cycles of winter, and the daily traffic of a family home. When properly installed with a strong sub base, a tarmac driveway can last for decades with minimal maintenance. Occasional sealing can extend its life and improve its appearance.
Another advantage is that tarmac is easy to clear of snow and leaves. Its smooth surface also makes it comfortable to walk on and easy to push bins or bicycles across.
There are, however, some limitations. Tarmac is not as visually interesting as block paving or resin. It comes in a limited range of colours, usually black or dark grey. It can also soften in very hot weather, leaving tyre marks or indents. Cracks can appear over time, and repairing them often leaves a visible patch. Also, because tarmac is an impermeable surface, you need to ensure that drainage is properly managed. In many areas, a new tarmac driveway must be designed to allow water to soak away or be directed to a suitable drainage point.
Resin-Bound Surfaces: Modern and Permeable
Resin-bound surfacing is a mixture of aggregate stones and a clear polyurethane resin. The combined material is trowelled or screeded onto a suitable base. The result is a smooth, porous surface that looks like loose gravel but is solid and durable.
Strengths of Resin-Bound Surfaces
Resin-bound surfaces have become increasingly popular for their appearance and performance. They offer a natural, textured look that fits well with both modern and traditional homes. The range of colours and stone types is wide, so you can create a custom finish.
One of the biggest practical benefits is permeability. Because the material is porous, rainwater drains straight through it. This makes resin-bound driveways SUDS-compliant (Sustainable Urban Drainage Systems), which is often a requirement for new or replacement driveways. It also means there are no puddles after heavy rain.
Resin-bound surfaces are also very low maintenance. They are resistant to weeds, as there are no joints for seeds to settle in. They do not need sealing or re-sanding. Cleaning is simple: a gentle wash with water and a mild detergent is usually enough.
However, resin-bound surfacing is typically more expensive than tarmac and comparable to block paving. The installation requires skill and care, as the resin must be mixed correctly and applied evenly. If the sub base is not properly prepared, the surface can crack or sink. Also, resin can discolour over time if exposed to a lot of direct sunlight, though modern UV-stable resins reduce this risk.
Another point to consider is that resin-bound surfaces are less forgiving of heavy point loads, such as a car jack. A sharp object placed on the surface can leave a mark. Repairs are not as straightforward as with block paving; a damaged area usually needs to be cut out and replaced, which can be noticeable.
Comparing the Three Options Side by Side
To help you decide, here is a quick comparison of the key factors:
- Cost: Tarmac is generally the cheapest. Block paving and resin-bound surfaces are more expensive, with resin often being the priciest for a high-quality installation.
- Appearance: Block paving and resin offer more design options. Tarmac is plain but can be dressed up with patterned edging or a contrasting border.
- Durability: All three can last 20 years or more with correct installation and maintenance. Tarmac is very tough but can soften in heat. Block paving is easy to repair. Resin is durable but can be damaged by heavy point loads.
- Maintenance: Block paving needs occasional re-sanding and weed control. Tarmac needs sealing every few years. Resin-bound surfaces need very little maintenance beyond cleaning.
- Drainage: Resin-bound is the best for natural drainage. Block paving can be made permeable. Tarmac is impermeable and requires careful drainage planning.
Making Your Choice
There is no single best material for every driveway. The right choice depends on your priorities.
If your main concern is keeping the initial cost low and you do not mind a simple look, tarmac is a strong contender. It is practical, durable, and quick to install. Just make sure the drainage is sorted out properly.
If you value appearance and want a driveway that adds kerb appeal, block paving gives you a lot of freedom. It is also a good choice if you think you might need to repair sections later, as individual blocks can be replaced. Be prepared for the ongoing maintenance of joints.
If you want a modern, low-maintenance surface that handles drainage beautifully, resin-bound is worth the investment. It works particularly well for driveways with lots of curves or awkward shapes, as it can be laid seamlessly. It also avoids the weed problems that can plague block paving.
Finally, consider the style of your home and the surrounding area. A period property might suit the traditional look of block paving. A contemporary house could be enhanced by a sleek resin-bound surface. Tarmac tends to work well in more functional settings, such as side access or parking areas.
Whichever material you lean towards, it is always wise to talk to a professional installer. A company such as Alpine Driveways & Roofing Ltd can assess your property, discuss the pros and cons for your specific situation, and provide a quote that covers the full job, including the sub base, edging, and drainage. A well-installed driveway, regardless of the material, will serve you well for years.
Final Points to Consider
Before making a decision, think about how you use your driveway. Do you park two cars on it every day? Do you have a van or a heavy vehicle? Do children play on it? Do you want to minimise maintenance? Answering these questions will help narrow down your options.
Also, check with your local planning authority. Some areas have rules about permeable surfaces, and you may need to ensure your new driveway meets regulations. A good installer will handle this for you.
Ultimately, the best driveway is one that fits your budget, suits your home, and stands up to the demands of daily life. With a clear understanding of what block paving, tarmac, and resin-bound surfaces offer, you can make an informed choice. For tailored advice, a professional like Alpine Driveways & Roofing Ltd can guide you through the process from start to finish.